AI Art Critic

AI Art Critic — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  EasyChair

  EasyChair is a web-based conference management software system. It has been used since 2002 in the scientific community for tasks such as organising research paper submission and review. In 2012, EasyChair added an open access online publication service for conference proceedings. == Description == EasyChair is a paid web-based conference management software system used, among other tasks, to organize paper submission and review, similar to other event management system software such as OpenConf. EasyChair used to be run by the Department of Computer Science at the University of Manchester but now it is a commercial service, owned by EasyChair Ltd. in Stockport (established 2016). EasyChair used to be free, for standard service, but as of 2022, only minimal services are free. The EasyChair website also provides an open access online publication service for conference proceedings. When launched in 2012, the service was for computer science only, but in 2016 it was expanded to all sciences. == History == The EasyChair software has been in continuous development since 2002. As of 2015, the code base consists of nearly 300,000 lines of code, and it has been used by more than 41,000 conferences. More than two and a half million users in the scientific community reported using it in 2019.

  Read more →
• 

  ServerNet

  ServerNet is a switched fabric communications link primarily used in proprietary computers made by Tandem Computers, Compaq, and HP. Its features include good scalability, clean fault containment, error detection and failover. The ServerNet architecture specification defines a connection between nodes, either processor or high performance I/O nodes such as storage devices. == History == Tandem Computers developed the original ServerNet architecture and protocols for use in its own proprietary computer systems starting in 1992, and released the first ServerNet systems in 1995. Early attempts to license the technology and interface chips to other companies failed, due in part to a disconnect between the culture of selling complete hardware / software / middleware computer systems and that needed for selling and supporting chips and licensing technology. A follow-on development effort ported the Virtual Interface Architecture to ServerNet with PCI interface boards connecting personal computers. Infiniband directly inherited many ServerNet features. As of 2017, systems still ship based on the ServerNet architecture.

  Read more →
• 

  Out-of-band control

  Out-of-band control is a method used by network protocols for sending control information (commands, logins, or session signals) separately from the main data, improving reliability and preventing interference. File Transfer Protocol (FTP) employs an out-of-band approach, using one connection for control commands, like logging in or requesting files, and a separate connection for transferring the files themselves.

  Read more →
• 

  Social Media Working Group Act of 2014

  The Social Media Working Group Act of 2014 (H.R. 4263) is a bill that would direct the United States Secretary of Homeland Security to establish within the United States Department of Homeland Security (DHS) a social media working group (the Group) to provide guidance and best practices to the emergency preparedness and response community on the use of social media technologies before, during, and after a terrorist attack. The bill was introduced into the United States House of Representatives during the 113th United States Congress. == Background == === Social media === Social media is the social interaction among people in which they create, share or exchange information and ideas in virtual communities and networks. Andreas Kaplan and Michael Haenlein define social media as "a group of Internet-based applications that build on the ideological and technological foundations of Web 2.0, and that allow the creation and exchange of user-generated content." Furthermore, social media depend on mobile and web-based technologies to create highly interactive platforms through which individuals and communities share, co-create, discuss, and modify user-generated content. They introduce substantial and pervasive changes to communication between organizations, communities, and individuals. Social media differ from traditional or industrial media in many ways, including quality, reach, frequency, usability, immediacy, and permanence. === Virtual Social Media Working Group === First responders have increasingly used social media in emergency response and recovery operations. Social media tools are used to connect with citizens after a disaster and share information. The Virtual Social Media Working group (VSMWG) is an online platform that gives advice to first responders on how to safely and effectively use social media in emergency response operations. The working group is made up of subject matter experts from across the U.S. It was created by DHS in December 2010 and gives first responders guidance and best practices regarding the use of social media during emergencies. The DHS S&T and the VSMWG work with local and state governments, academics and nonprofits. Meetings of the VSMWG are chaired by the Under Secretary of Homeland Security for Science and Technology. == Provisions of the bill == This summary is based largely on the summary provided by the Congressional Research Service, a public domain source. The Social Media Working Group Act of 2014 would amend the Homeland Security Act of 2002 to direct the United States Secretary of Homeland Security to establish within the United States Department of Homeland Security (DHS) a social media working group (the Group) to provide guidance and best practices to the emergency preparedness and response community on the use of social media technologies before, during, and after a terrorist attack. The bill would require the Group to submit an annual report that includes: (1) a review of current and emerging social media technologies being used to support preparedness and response activities related to terrorist attacks, of best practices and lessons learned on the use of social media during the response to terrorist attacks that occurred during the period covered by the report, and of available training for government officials on the use of social media in response to a terrorist attack; (2) recommendations to improve DHS's use of social media and to improve information sharing among DHS and its components and among state and local governments; and (3) a summary of coordination efforts with the private sector to discuss and resolve legal, operational, technical, privacy, and security concerns. == Congressional Budget Office report == This summary is based largely on the summary provided by the Congressional Budget Office, as ordered reported by the House Committee on Homeland Security on June 11, 2014. This is a public domain source. H.R. 4263 would direct the Department of Homeland Security (DHS) to establish a working group to provide guidance and best practices on the use of social media technologies, specifically during a terrorist attack or other emergency. The group would prepare guidance for the emergency preparedness and response community. The bill would define the membership of the working group, which would include more than 20 experts from federal, state, local, and tribal governments along with nongovernmental organizations. The working group would be exempt from the Federal Advisory Committee Act and would be authorized to hold virtual meetings to fulfill the requirement to meet twice a year. The working group would be required to submit an annual report on emerging trends and best practices for emergency response through social media. Based on the cost of similar activities carried out under the DHS Acquisition and Accountability Efficiency Act and the Critical Infrastructure Research and Development Advancement Act of 2013, the Congressional Budget Office (CBO) estimates that the new DHS responsibilities and the annual report required by H.R. 4263 would cost a total of less than $500,000 annually, assuming the availability of appropriated funds. Enacting the legislation would not affect direct spending or revenues; therefore, pay-as-you-go procedures do not apply. H.R. 4263 contains no intergovernmental or private-sector mandates as defined in the Unfunded Mandates Reform Act and would impose no costs on state, local, or tribal governments. == Procedural history == The Social Media Working Group Act of 2014 was introduced into the United States House of Representatives on March 14, 2014, by Rep. Susan W. Brooks (R, IN-5). It was referred to the United States House Committee on Homeland Security and the United States House Homeland Security Subcommittee on Emergency Preparedness, Response, and Communications. On June 19, 2014, it was reported (amended) alongside House Report 113-480. On July 8, 2014, the House voted in Roll Call Vote 369 to pass the bill 375–19. == Debate and discussion == Nate Elliott, a social media expert at Forrester Research, explains that "the hope is when government or another authority tweets something, people will share it for them," but that this often doesn't happen. This problem, that "messages wash away very quickly," is the reason that the federal government is trying to formulate a better social media strategy. Rep. Steven Palazzo (R-MS), who co-sponsored the bill, stated that "social media has played a crucial role in emergency preparedness and response in Mississippi, including during disasters like Hurricane Isaac and the tornadoes that hit the Hattiesburg area a little over a year ago." He said that their goal with the bill was to "build upon existing public-private partnerships and use social media in a more strategic way in order to help save lives and property."

  Read more →
• 

  Vector database

  A vector database, vector store or vector search engine is a database that stores and retrieves embeddings of data in vector space. Vector databases typically implement approximate nearest neighbor algorithms so users can search for records semantically similar to a given input, unlike traditional databases which primarily look up records by exact match. Use-cases for vector databases include similarity search, semantic search, multi-modal search, recommendations engines, object detection, and retrieval-augmented generation (RAG). Vector embeddings are mathematical representations of data in a high-dimensional space. In this space, each dimension corresponds to a feature of the data, with the number of dimensions ranging from a few hundred to tens of thousands, depending on the complexity of the data being represented. Each data item is represented by one vector in this space. Words, phrases, or entire documents, as well as images, audio, and other types of data, can all be vectorized. These feature vectors may be computed from the raw data using machine learning methods such as feature extraction algorithms, word embeddings or deep learning networks. The goal is that semantically similar data items receive feature vectors close to each other. Vector retrieval can be combined with metadata filtering or lexical search to support filtered and hybrid retrieval workflows. == Techniques == Common techniques for similarity search on high-dimensional vectors include: Hierarchical Navigable Small World (HNSW) graphs Locality-sensitive hashing (LSH) and sketching Product quantization (PQ) Inverted files These techniques may also be combined in vector search systems. In recent benchmarks, HNSW-based implementations have been among the best performers. Conferences such as the International Conference on Similarity Search and Applications (SISAP) and the Conference on Neural Information Processing Systems (NeurIPS) have hosted competitions on vector search in large databases. == Applications == Vector databases are used in a wide range of machine learning applications including similarity search, semantic search, multi-modal search, recommendations engines, object detection, and retrieval-augmented generation. === Retrieval-augmented generation === An especially common use-case for vector databases is in retrieval-augmented generation (RAG), a method to improve domain-specific responses of large language models. The retrieval component of a RAG can be any search system, but is most often implemented as a vector database. Text documents describing the domain of interest are collected, and for each document or document section, a feature vector (known as an "embedding") is computed, typically using a deep learning network, and stored in a vector database along with a link to the document. Given a user prompt, the feature vector of the prompt is computed, and the database is queried to retrieve the most relevant documents. These are then automatically added into the context window of the large language model, and the large language model proceeds to create a response to the prompt given this context. == Implementations ==

  Read more →
• 

  Localhost

  In computer networking, localhost is a hostname that refers to the current computer used to access it. The name localhost is reserved for loopback purposes. It is used to access the network services that are running on the host via the loopback network interface. Using the loopback interface bypasses any local network interface hardware. == Loopback == The local loopback mechanism may be used to run a network service on a host without requiring a physical network interface, or without making the service accessible from the networks the computer may be connected to. For example, a locally installed website may be accessed from a Web browser by the URL http://localhost to display its home page. IPv4 network standards reserve the entire address block 127.0.0.0/8 (more than 16 million addresses) for loopback purposes. That means any packet sent to any of those addresses is looped back. The address 127.0.0.1 is the standard address for IPv4 loopback traffic; the rest are not supported by all operating systems. However, they can be used to set up multiple server applications on the host, all listening on the same port number. In the IPv6 addressing architecture there is only a single address assigned for loopback: ::1. The standard precludes the assignment of that address to any physical interface, as well as its use as the source or destination address in any packet sent to remote hosts. == Name resolution == The name localhost normally resolves to the IPv4 loopback address 127.0.0.1, and to the IPv6 loopback address ::1. This resolution is normally configured by the following lines in the operating system's hosts file: 127.0.0.1 localhost ::1 localhost The name may also be resolved by Domain Name System (DNS) servers, but there are special considerations governing the use of this name: An IPv4 or IPv6 address query for the name localhost must always resolve to the respective loopback address. Applications may resolve the name to a loopback address themselves, or pass it to the local name resolver mechanisms. When a name resolver receives an address (A or AAAA) query for localhost, it should return the appropriate loopback addresses, and negative responses for any other requested record types. Queries for localhost should not be sent to caching name servers. To avoid burdening the Domain Name System root servers with traffic, caching name servers should never request name server records for localhost, or forward resolution to authoritative name servers. When authoritative name servers receive queries for 'localhost' in spite of the provisions mentioned above, they should resolve them appropriately. In addition to the mapping of localhost to the loopback addresses (127.0.0.1 and ::1), localhost may also be mapped to other IPv4 (loopback) addresses and it is also possible to assign other, or additional, names to any loopback address. The mapping of localhost to addresses other than the designated loopback address range in the hosts file or in DNS is not guaranteed to have the desired effect, as applications may map the name internally. In the Domain Name System, the name .localhost is reserved as a top-level domain name, originally set aside to avoid confusion with the hostname localhost. Domain name registrars are precluded from delegating domain names in the top-level .localhost domain. == Historical notes == In 1981, the block 127.0.0.0/8 got a 'reserved' status, as not to assign it as a general purpose class A IP network. This block was officially assigned for loopback purposes in 1986. Its purpose as a Special Use IPv4 Address block was confirmed in 1994,, 2002, 2010,, and last in 2013. From the outset, in 1995, the single IPv6 loopback address ::1 was defined. Its purpose and definition was unchanged in 1998,, 2003,, and up to the current definition, in 2006. == Packet processing == The processing of any packet sent to a loopback address, is implemented in the link layer of the TCP/IP stack. Such packets are never passed to any network interface controller (NIC) or hardware device driver and must not appear outside of a computing system, or be routed by any router. This permits software testing and local services, even in the absence of any hardware network interfaces. Looped-back packets are distinguished from any other packets traversing the TCP/IP stack only by the special IP address they were addressed to. Thus, the services that ultimately receive them respond according to the specified destination. For example, an HTTP service could route packets addressed to 127.0.0.99:80 and 127.0.0.100:80 to different Web servers, or to a single server that returns different web pages. To simplify such testing, the hosts file may be configured to provide appropriate names for each address. Packets received on a non-loopback interface with a loopback source or destination address must be dropped. Such packets are sometimes referred to as Martian packets. As with any other bogus packets, they may be malicious and any problems they might cause can be avoided by applying bogon filtering. == Special cases == The releases of the MySQL database differentiate between the use of the hostname localhost and the use of the addresses 127.0.0.1 and ::1. When using localhost as the destination in a client connector interface of an application, the MySQL application programming interface connects to the database using a Unix domain socket, while a TCP connection via the loopback interface requires the direct use of the explicit address. One notable exception to the use of the 127.0.0.0/8 addresses is their use in Multiprotocol Label Switching (MPLS) traceroute error detection, in which their property of not being routable provides a convenient means to avoid delivery of faulty packets to end users.

  Read more →
• 

  Harvest now, decrypt later

  Harvest now, decrypt later (HNDL) is a surveillance strategy that relies on the acquisition and long-term storage of currently unreadable encrypted data awaiting possible breakthroughs in decryption technology that would render it readable in the future—a hypothetical date referred to as Y2Q (a reference to Y2K), or Q-Day. The most common concern is the prospect of developments in quantum computing which would allow current strong encryption algorithms to be broken at some time in the future, making it possible to decrypt any stored material that had been encrypted using those algorithms. However, the improvement in decryption technology need not be due to a quantum-cryptographic advance; any other form of attack capable of enabling decryption would be sufficient. The existence of this strategy has led to concerns about the need to urgently deploy post-quantum cryptography; even though no practical quantum attacks yet exist, some data stored now may still remain sensitive even decades into the future. As of 2022, the U.S. federal government has proposed a roadmap for organizations to start migrating toward quantum-cryptography-resistant algorithms to mitigate these threats. This new version of Commercial National Security Algorithm Suite uses publicly-available algorithms and is allowed for government use up to the TOP SECRET level. == Terminology and scope == The term “harvest now, decrypt later” encompasses various surveillance or espionage operations in which ciphertext or encrypted communications are collected today with the view that they may one day be decrypted, given sufficient advances in computing power or cryptanalysis. The abbreviation HNDL is sometimes used in technical and policy documents. The “Y2Q” (or “Q-Day”) label draws an analogy to the Y2K date-change issue, emphasising a potential future point at which current cryptography may collapse. The strategy is particularly relevant for data with long confidentiality lifetimes, such as diplomatic communications, personal health records, critical infrastructure logs, or intellectual property. == Mitigation strategies == The primary defense against HNDL attacks is the transition to post-quantum cryptography (PQC), which utilizes algorithms believed to be secure against quantum computer attacks. However, because PQC protects the data payload digitally, rather than the transmission itself, the encrypted data can still be harvested and stored. A complementary approach involves physical layer security (also known as optical layer encryption or photonic shielding). Unlike algorithmic encryption, this method modifies the optical waveform itself—often by burying the signal within optical noise or using spectral phase encoding—to render the transmission unrecordable by standard receivers. By preventing the attacker from capturing a valid signal in the first place, this approach aims to eliminate the "harvest" phase of the threat. Commercial implementations of harvest-proof optical encryption have been developed by firms such as CyberRidge to secure long-haul fiber networks. Field trials have demonstrated 100 Gbps throughput over legacy DWDM networks using this method.

  Read more →
• 

  Control break

  In computer programming, a control break is a change in the value of one of the keys on which a file is sorted, which requires some extra processing. For example, with an input file sorted by post code, the number of items found in each postal district might need to be printed on a report, and a heading shown for the next district. Quite often there is a hierarchy of nested control breaks in a program, such as streets within districts within areas, with the need for a grand total at the end. Structured programming techniques have been developed to ensure correct processing of control breaks in languages such as COBOL and to ensure that conditions such as empty input files and sequence errors are handled properly. With fourth-generation languages such as SQL, the programming language should handle most of the details of control breaks automatically.

  Read more →
• 

  Static program analysis

  In computer science, static program analysis (also known as static analysis or static simulation) is the analysis of computer programs performed without executing them, in contrast with dynamic program analysis, which is performed on programs during their execution in the integrated environment. The term is usually applied to analysis performed by an automated tool, with human analysis typically being called "program understanding", program comprehension, or code review. In the last of these, software inspection and software walkthroughs are also used. In most cases the analysis is performed on some version of a program's source code, and, in other cases, on some form of its object code. Two leading approaches to resource certification have been Static Analysis (SA) and Implicit Computational Complexity (ICC). SA is algorithmic in nature: it focuses on a broad programming language of choice, and seeks to determine by syntactic means whether given programs in that language are feasible. In contrast, ICC attempts to create from the outset specialized programming languages or methods that delineate a complexity class. Thus, SA's focus is on compile time, making no demand on the programmer; whereas ICC is a language-design discipline." The discipline of static analysis should not be confused with linting, which is the process of checking for coding style mistakes. == Rationale == The sophistication of the analysis performed by tools varies from those that only consider the behaviour of individual statements and declarations, to those that include the complete source code of a program in their analysis. The uses of the information obtained from the analysis vary from highlighting possible coding errors (e.g., the lint tool) to formal methods that mathematically prove properties about a given program (e.g., its behaviour matches that of its specification). Software metrics and reverse engineering can be described as forms of static analysis. Deriving software metrics and static analysis are increasingly deployed together, especially in creation of embedded systems, by defining so-called software quality objectives. A growing commercial use of static analysis is in the verification of properties of software used in safety-critical computer systems and locating potentially vulnerable code. For example, the following industries have identified the use of static code analysis as a means of improving the quality of increasingly sophisticated and complex software: Medical software: The US Food and Drug Administration (FDA) has identified the use of static analysis for medical devices. Nuclear software: In the UK the Office for Nuclear Regulation (ONR) recommends the use of static analysis on reactor protection systems. Aviation software (in combination with dynamic analysis). Automotive & Machines (functional safety features form an integral part of each automotive product development phase, ISO 26262, section 8). A study in 2012 by VDC Research reported that 28.7% of the embedded software engineers surveyed use static analysis tools and 39.7% expect to use them within 2 years. A study from 2010 found that 60% of the interviewed developers in European research projects made at least use of their basic IDE built-in static analyzers. However, only about 10% employed an additional other (and perhaps more advanced) analysis tool. In the application security industry the name static application security testing (SAST) is also used. SAST is an important part of Security Development Lifecycles (SDLs) such as the SDL defined by Microsoft and a common practice in software companies. == Tool types == The OMG (Object Management Group) published a study regarding the types of software analysis required for software quality measurement and assessment. This document on "How to Deliver Resilient, Secure, Efficient, and Easily Changed IT Systems in Line with CISQ Recommendations" describes three levels of software analysis. Unit Level Analysis that takes place within a specific program or subroutine, without connecting to the context of that program. Technology Level Analysis that takes into account interactions between unit programs to get a more holistic and semantic view of the overall program in order to find issues and avoid obvious false positives. System Level Analysis that takes into account the interactions between unit programs, but without being limited to one specific technology or programming language. A further level of software analysis can be defined. Mission/Business Level Analysis that takes into account the business/mission layer terms, rules and processes that are implemented within the software system for its operation as part of enterprise or program/mission layer activities. These elements are implemented without being limited to one specific technology or programming language and in many cases are distributed across multiple languages, but are statically extracted and analyzed for system understanding for mission assurance. == Formal methods == Formal methods is the term applied to the analysis of software (and computer hardware) whose results are obtained purely through the use of rigorous mathematical methods. The mathematical techniques used include denotational semantics, axiomatic semantics, operational semantics, and abstract interpretation. By a straightforward reduction to the halting problem, it is possible to prove that (for any Turing complete language), finding all possible run-time errors in an arbitrary program (or more generally any kind of violation of a specification on the final result of a program) is undecidable: there is no mechanical method that can always answer truthfully whether an arbitrary program may or may not exhibit runtime errors. This result dates from the works of Church, Gödel and Turing in the 1930s (see: Halting problem and Rice's theorem). As with many undecidable questions, one can still attempt to give useful approximate solutions. Some of the implementation techniques of formal static analysis include: Abstract interpretation, to model the effect that every statement has on the state of an abstract machine (i.e., it 'executes' the software based on the mathematical properties of each statement and declaration). This abstract machine over-approximates the behaviours of the system: the abstract system is thus made simpler to analyze, at the expense of incompleteness (not every property true of the original system is true of the abstract system). If properly done, though, abstract interpretation is sound (every property true of the abstract system can be mapped to a true property of the original system). Data-flow analysis, a lattice-based technique for gathering information about the possible set of values; Hoare logic, a formal system with a set of logical rules for reasoning rigorously about the correctness of computer programs. There is tool support for some programming languages (e.g., the SPARK programming language (a subset of Ada) and the Java Modeling Language—JML—using ESC/Java and ESC/Java2, Frama-C WP (weakest precondition) plugin for the C language extended with ACSL (ANSI/ISO C Specification Language) ). Model checking, considers systems that have finite state or may be reduced to finite state by abstraction; Symbolic execution, as used to derive mathematical expressions representing the value of mutated variables at particular points in the code. Nullable reference analysis == Data-driven static analysis == Data-driven static analysis leverages extensive codebases to infer coding rules and improve the accuracy of the analysis. For instance, one can use all Java open-source packages available on GitHub to learn good analysis strategies. The rule inference can use machine learning techniques. It is also possible to learn from a large amount of past fixes and warnings. == Remediation == Static analyzers produce warnings. For certain types of warnings, it is possible to design and implement automated remediation techniques. For example, Logozzo and Ball have proposed automated remediations for C# cccheck.

  Read more →
• 

  Content management

  Content management (CM) are a set of processes and technologies that support the collection, managing, and publishing of information in any form or medium. When stored and accessed via computers, this information may be more specifically referred to as digital content, or simply as content. Digital content may take the form of text (such as electronic documents), images, multimedia files (such as audio or video files), or any other file type that follows a content lifecycle requiring management. The process of content development and management is complex enough that various commercial software vendors (large and small), such as Interwoven and Microsoft, offer content management software to control and automate significant aspects of the content lifecycle. == Process == Content management practices and goals vary by mission and by organizational governance structure. News organizations, e-commerce websites, and educational institutions all use content management, but in different ways. This leads to differences in terminology and in the names and number of steps in the process. For example, some digital content is created by one or more authors. Over time that content may be edited. One or more individuals may provide some editorial oversight, approving the content for publication. Publishing may take many forms: it may be the act of "pushing" content out to others, or simply granting digital access rights to certain content to one or more individuals. Later that content may be superseded by another version of the content and thus retired or removed from use (as when this wiki page is modified). Content management is an inherently collaborative process. It often consists of the following basic roles and responsibilities: Creator – responsible for creating and editing content. Editor – responsible for tuning the content message and the style of delivery, including translation and localization. Publisher – responsible for releasing the content for use. Administrator – responsible for managing access permissions to folders, collections and files, usually accomplished by assigning access rights to user groups or roles. Admins may also assist and support users in various ways. Consumer, viewer or guest – the person who reads or otherwise consumes the content after it is published or shared. A critical aspect of content management is the ability to manage versions of content as it evolves (see also version control). Authors and editors often need to restore older versions of edited products due to a process failure or an undesirable series of edits. Time-sensitive content may also require updates as the subject matter evolves over time. Another equally important aspect of content management involves the creation, maintenance, and application of review standards. Each member of the content creation and review process has a unique role and set of responsibilities in the development or publication of the content. Each review team member requires clear and concise review standards. These must be maintained on an ongoing basis to ensure the long-term consistency and health of the knowledge base. A content management system is a set of automated processes that may support the following features: Import and creation of documents and multimedia material Identification of all key users and their roles The ability to assign roles and responsibilities to different instances of content categories or types Definition of workflow tasks often coupled with messaging so that content managers are alerted to changes in content The ability to track and manage multiple versions of a single instance of content The ability to publish the content to a repository to support access The ability to personalize content based on a set of rules Increasingly, the repository is an inherent part of the system, and incorporates enterprise search and retrieval. Content management systems take the following forms: Web content management system—software for web site management (often what content management implicitly means) Output of a newspaper editorial staff organization Workflow for article publication Document management systems Knowledge management software Single source content management system—content stored in chunks within a relational database Variant management system—where personnel tag source content (usually text and graphics) to represent variants stored as single source "master" content modules, resolved to the desired variant at publication (for example: automobile owners manual content for 12 model years stored as single master content files and "called" by model year as needed)—often used in concert with database chunk storage (see above) for large content objects == Governance structures == Content management expert Marc Feldman defines three primary content management governance structures: localized, centralized, and federated—each having its unique strengths and weaknesses. === Localized governance === By putting control in the hands of those closest to the content, the context experts, localized governance models empower and unleash creativity. These benefits come, however, at the cost of a partial-to-total loss of managerial control and oversight. === Centralized governance === When the levers of control are strongly centralized, content management systems are capable of delivering an exceptionally clear and unified brand message. Moreover, centralized content management governance structures allow for a large number of cost-savings opportunities in large enterprises, realized, for example, through (1) the avoidance of duplicated efforts in creating, editing, formatting, repurposing and archiving content; (2) process management and the streamlining of all content related labor; and/or (3) an orderly deployment or updating of the content management system. === Federated governance === Federated governance models potentially realize the benefits of both localized and centralized control while avoiding the weaknesses of both. While content management software systems are inherently structured to enable federated governance models, realizing these benefits can be difficult because it requires, for example, negotiating the boundaries of control with local managers and content creators. In the case of larger enterprises, in particular, the failure to fully implement or realize a federated governance structure equates to a failure to realize the full return on investment and cost savings that content management systems enable. == Implementation == Content management implementations must be able to manage content distributions and digital rights in content life cycle. Content management systems are usually involved with digital rights management in order to control user access and digital rights. In this step, the read-only structures of digital rights management systems force some limitations on content management, as they do not allow authors to change protected content in their life cycle. Creating new content using managed (protected) content is also an issue that gets protected contents out of management controlling systems. A few content management implementations cover all these issues.

  Read more →
• 

  Opinion Space

  Developed at UC Berkeley, "Opinion Space" (also known as The Collective Discovery Engine) is a social media technology designed to help communities generate and exchange ideas about important issues and policies. Version 1.0 was launched on April 4, 2009, at UC Berkeley, and explored the question "Do you think legalizing marijuana is a good idea?" It has since undergone 4 different iterations, and been used in partnership with various organizations including The Occupy movement (Version 4.0, 5/24/2013) and the African Robots Network (Version 4.0, 5/25/2013). Opinion Space has also been used in collaboration with the United States State Department and the University of California's Berkeley Center for New Media (Version 2.0, 12/1/2009 and Version 3.0, 2/25/2012) to gain public perspective on foreign policy issues. Then U.S. Secretary of State Hillary Rodham Clinton explained, "Opinion Space will harness the power of connection technologies to provide a unique forum for international dialogue. This is...an opportunity to extend our engagement beyond the halls of government directly to the people of the world" (2010). The website uses data visualization and statistical analysis to present and develop public opinion and ideas. Opinion Space is a self-organizing system that uses an intuitive graphical "map" that displays patterns, trends, and insights as they emerge and employs the wisdom of crowds to identify and highlight the most insightful ideas. The system uses a game model that incorporates techniques from deliberative polling, collaborative filtering, and multidimensional visualization.

  Read more →
• 

  Scalable Coherent Interface

  The Scalable Coherent Interface or Scalable Coherent Interconnect (SCI), is a high-speed interconnect standard for shared memory multiprocessing and message passing. The goal was to scale well, provide system-wide memory coherence and a simple interface; i.e. a standard to replace existing buses in multiprocessor systems with one with no inherent scalability and performance limitations. The IEEE Std 1596-1992, IEEE Standard for Scalable Coherent Interface (SCI) was approved by the IEEE standards board on March 19, 1992. It saw some use during the 1990s, but never became widely used and has been replaced by other systems from the early 2000s. == History == Soon after the Fastbus (IEEE 960) follow-on Futurebus (IEEE 896) project in 1987, some engineers predicted it would already be too slow for the high performance computing marketplace by the time it would be released in the early 1990s. In response, a "Superbus" study group was formed in November 1987. Another working group of the standards association of the Institute of Electrical and Electronics Engineers (IEEE) spun off to form a standard targeted at this market in July 1988. It was essentially a subset of Futurebus features that could be easily implemented at high speed, along with minor additions to make it easier to connect to other systems, such as VMEbus. Most of the developers had their background from high-speed computer buses. Representatives from companies in the computer industry and research community included Amdahl, Apple Computer, BB&N, Hewlett-Packard, CERN, Dolphin Server Technology, Cray Research, Sequent, AT&T, Digital Equipment Corporation, McDonnell Douglas, National Semiconductor, Stanford Linear Accelerator Center, Tektronix, Texas Instruments, Unisys, University of Oslo, University of Wisconsin. The original intent was a single standard for all buses in the computer. The working group soon came up with the idea of using point-to-point communication in the form of insertion rings. This avoided the lumped capacitance, limited physical length/speed of light problems and stub reflections in addition to allowing parallel transactions. The use of insertion rings is credited to Manolis Katevenis who suggested it at one of the early meetings of the working group. The working group for developing the standard was led by David B. Gustavson (chair) and David V. James (Vice Chair). David V. James was a major contributor for writing the specifications including the executable C-code. Stein Gjessing’s group at the University of Oslo used formal methods to verify the coherence protocol and Dolphin Server Technology implemented a node controller chip including the cache coherence logic. Different versions and derivatives of SCI were implemented by companies like Dolphin Interconnect Solutions, Convex, Data General AViiON (using cache controller and link controller chips from Dolphin), Sequent and Cray Research. Dolphin Interconnect Solutions implemented a PCI and PCI-Express connected derivative of SCI that provides non-coherent shared memory access. This implementation was used by Sun Microsystems for its high-end clusters, Thales Group and several others including volume applications for message passing within HPC clustering and medical imaging. SCI was often used to implement non-uniform memory access architectures. It was also used by Sequent Computer Systems as the processor memory bus in their NUMA-Q systems. Numascale developed a derivative to connect with coherent HyperTransport. == The standard == The standard defined two interface levels: The physical level that deals with electrical signals, connectors, mechanical and thermal conditions The logical level that describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives, control and status registers, and initialization and error recovery facilities. This structure allowed new developments in physical interface technology to be easily adapted without any redesign on the logical level. Scalability for large systems is achieved through a distributed directory-based cache coherence model. (The other popular models for cache coherency are based on system-wide eavesdropping (snooping) of memory transactions – a scheme which is not very scalable.) In SCI each node contains a directory with a pointer to the next node in a linked list that shares a particular cache line. SCI defines a 64-bit flat address space (16 exabytes) where 16 bits are used for identifying a node (65,536 nodes) and 48 bits for address within the node (256 terabytes). A node can contain many processors and/or memory. The SCI standard defines a packet switched network. === Topologies === SCI can be used to build systems with different types of switching topologies from centralized to fully distributed switching: With a central switch, each node is connected to the switch with a ringlet (in this case a two-node ring). In distributed switching systems, each node can be connected to a ring of arbitrary length and either all or some of the nodes can be connected to two or more rings. The most common way to describe these multi-dimensional topologies is k-ary n-cubes (or tori). The SCI standard specification mentions several such topologies as examples. The 2-D torus is a combination of rings in two dimensions. Switching between the two dimensions requires a small switching capability in the node. This can be expanded to three or more dimensions. The concept of folding rings can also be applied to the Torus topologies to avoid any long connection segments. === Transactions === SCI sends information in packets. Each packet consists of an unbroken sequence of 16-bit symbols. The symbol is accompanied by a flag bit. A transition of the flag bit from 0 to 1 indicates the start of a packet. A transition from 1 to 0 occurs 1 (for echoes) or 4 symbols before the packet end. A packet contains a header with address command and status information, payload (from 0 through optional lengths of data) and a CRC check symbol. The first symbol in the packet header contains the destination node address. If the address is not within the domain handled by the receiving node, the packet is passed to the output through the bypass FIFO. In the other case, the packet is fed to a receive queue and may be transferred to a ring in another dimension. All packets are marked when they pass the scrubber (a node is established as scrubber when the ring is initialized). Packets without a valid destination address will be removed when passing the scrubber for the second time to avoid filling the ring with packets that would otherwise circulate indefinitely. === Cache coherence === Cache coherence ensures data consistency in multiprocessor systems. The simplest form applied in earlier systems was based on clearing the cache contents between context switches and disabling the cache for data that were shared between two or more processors. These methods were feasible when the performance difference between the cache and memory were less than one order of magnitude. Modern processors with caches that are more than two orders of magnitude faster than main memory would not perform anywhere near optimal without more sophisticated methods for data consistency. Bus based systems use eavesdropping (snooping) methods since buses are inherently broadcast. Modern systems with point-to point links use broadcast methods with snoop filter options to improve performance. Since broadcast and eavesdropping are inherently non-scalable, these are not used in SCI. Instead, SCI uses a distributed directory-based cache coherence protocol with a linked list of nodes containing processors that share a particular cache line. Each node holds a directory for the main memory of the node with a tag for each line of memory (same line length as the cache line). The memory tag holds a pointer to the head of the linked list and a state code for the line (three states – home, fresh, gone). Associated with each node is also a cache for holding remote data with a directory containing forward and backward pointers to nodes in the linked list sharing the cache line. The tag for the cache has seven states (invalid, only fresh, head fresh, only dirty, head dirty, mid valid, tail valid). The distributed directory is scalable. The overhead for the directory based cache coherence is a constant percentage of the node’s memory and cache. This percentage is in the order of 4% for the memory and 7% for the cache. == Legacy == SCI is a standard for connecting the different resources within a multiprocessor computer system, and it is not as widely known to the public as for example the Ethernet family for connecting different systems. Different system vendors implemented different variants of SCI for their internal system infrastructure. These different implementations interface to very intricate mechanisms in processors and memory systems and each vendor has to preserve some degrees of

  Read more →
• 

  Zhura

  Zhura ( ZUR-ə) is a free, web-based screenwriting software application for writing and formatting screenplays to the film industry standard, as well as other formats. Zhura allows users to collaborate on scripts in public or private groups and uses Creative Commons Licensing for all work in the public workspace. On March 29, 2010, Zhura announced its merger with Scripped. Scripped's CEO, Sunil Rajaraman, remains the company's Chief Executive Officer (CEO) as of 2022. The Zhura CEO was Eric MacDonald, a former Cascade Communications engineer. Scripped later closed on April 1, 2015 after a catastrophic, irrecoverable data loss. == Script editor == Screenplay Template – The script editor provides a built-in screenplay template which formats the document to a standard for scripts as recommended by the AMPAS. The screenplay document is composed of seven elements: scene, action, character, dialogue, parenthetical, transition, and shot (see image). Each element has a specific style to which the script editor conforms as you type.Script Formats – Other major script formats for stage play, sitcom, audio drama and comic book are also supported as well as the ability to switch between them.Auto-Complete – Characters, scene headings and custom transitions are “remembered” as they are written and “recalled” with tab-completion when a writer starts a new character, scene heading or transition, respectively.Multiple Editors – With a collaborative editing model comparable to Google Docs, two or more users can edit the same script simultaneously, regardless of having a different operating system or web browser. Import/Export – A screenplay written in another program can be imported into the script editor and automatically conformed to the screenplay template. The closer the original script has adhered to the standard format, the better it will appear when imported. Supported import/export formats include Text (.txt) Word (.doc) Rich Text (.rtf) and OpenDocument (.odt). Scripts can also be exported as a PDF file with additional options.Tracking Changes – Similar to the “tracking” feature in Microsoft Word, a user can review all changes made to a script in the revision history as well as highlight the contributions of each writer. Offline Mode – The Google Gears-based offline functionality is in the process of being updated and is not available for new subscribers, according to the company founders. == Community == Scripped supports typical social networking features such as discussion boards, comments, user profiles, public and private writing groups, internal web mail and instant messaging within the script editor. There is also the option to share scripts with others outside of Scripped by making scripts externally viewable. Scripped is made up entirely of user-generated scripts that other users can share, critique and edit, offering creative support to a community of writers. == Licensing of user-created work == There are three types of work-spaces on Scripped (personal, group and public) with unique copyright and licensing management for the work created in each area. Any work a user originates may be moved from the personal area to a public or group area at any time. Once another user edits a script, however, it cannot be moved into the originator’s personal area. Personal Workspace – Any script created or video uploaded in the user’s personal workspace remains copyrighted to that user. Until the user moves that script or video from their personal area into a group or public area, no other user shares a copyright or license to that work. Private Group Workspace – The copyright to any script created or video uploaded in a private group workspace is allocated by the individual members of the group, however they see fit. Public Workspace – Any script created or video uploaded in the public workspace is assigned a Creative Commons license by the originator of that work. The originator of a script may select one of four Creative Commons licenses before introducing that script to the public. The selection of the license is determined by what the author wants to allow others to do with the work. Below is a list of Creative Commons licenses available for all scripts and videos in the public workspace. Share Alike (BY-SA) This license lets others remix, tweak, and build upon your work even for commercial reasons, as long as they credit the original user and license their new creations under the identical terms. This license is often compared to open source software licenses. All new works based on the original user's will carry the same license, so any derivatives will also allow commercial use. No Derivatives (BY-ND) This license allows for redistribution, commercial and non-commercial, as long as it is passed along unchanged and in whole, with credit to the original user. Non-Commercial, No Derivatives (BY-NC-ND) This license is the most restrictive of the four licenses, allowing redistribution. This license is often called the "free advertising" license because it allows others to download the original user work and share them with others as long as they mention the original user and link back to them, but they can't change them in any way or use them commercially. Non-Commercial, Share Alike (BY-NC-SA) This license lets others remix, tweak, and build upon the original user's work non-commercially, as long as they credit the original user and license their new creations under the identical terms. Others can download and redistribute the original user's work just like the BY-NC-ND license, but they can also translate, make remixes, and produce new stories based on the original user's work. All new work based on the original user's work will carry the same license, so any derivatives will also be non-commercial in nature. == Events == In April 2008, Zhura partnered with Improv Asylum, a comedy troupe in Boston, Massachusetts to produce a live sketch comedy show called "You Wrote It, Live" entirely written by the public on Zhura. Another show was produced in June.

  Read more →
• 

  Data thinking

  Data Thinking is a framework that integrates data science with the design process. It combines computational thinking, statistical thinking, and domain-specific knowledge to guide the development of data-driven solutions in product development. The framework is used to explore, design, develop, and validate solutions, with a focus on user experience and data analytics, including data collection and interpretation The framework aims to apply data literacy and inform decision-making through data-driven insights. == Major components == According to "Computational thinking in the era of data science": Data thinking involves understanding that solutions require both data-driven and domain-knowledge-driven rules. Data thinking evaluates whether data accurately represents real-life scenarios and improves data collection where necessary. The framework highlights the importance of preserving domain-specific meaning during data analysis. Data thinking incorporates statistical and logical analysis to identify patterns and irregularities. Data thinking involves testing solutions in real-life contexts and iteratively improving models based on new data. The process requires evaluating problems from multiple abstraction levels and understanding the potential for biases in generalizations. == Major phases == === Strategic context and risk analysis === Analyzing the broader digital strategy and assessing risks and opportunities is a common step before beginning a project. Techniques like coolhunting, trend analysis, and scenario planning can be used to assist with this. === Ideation and exploration === In this phase, focus areas are identified, and use cases are developed by integrating organizational goals, user needs, and data requirements. Design thinking methods, such as personas and customer journey mapping, are applied. === Prototyping === A proof of concept is created to test feasibility and refine solutions through iterative evaluation to optimize for effective performance. === Implementation and monitoring === Solutions are tested and monitored for performance and continual improvement. == Implementing Data Thinking == The following resources explain more about data thinking and its applications: "Data Thinking: Framework for data-based solutions" by StackFuel "What is Data Thinking? A modern approach to designing a data strategy" by Mantel Group "Data Science Thinking" by SpringerLink These sources provide detailed insights into the methodology, phases, and benefits of adopting Data Thinking in organizational processes.

  Read more →
• 

  Data exchange

  Data exchange is the process of moving data from one information system to another. It often involves transforming data that is native to the source system into a form that is consumable by the target system or to a standardized form that is consumable by any compatible system. In particular, data exchange allows data to be shared between computer programs. Data exchange is similar to data integration except that data may be restructured with possible loss of content. There may be no way to transform a particular collection based on exchange constraints. Conversely, there may be multiple ways to transform the data, in which case one option must be identified in order to achieve compatibility between source and target. There are two main types of data exchange: broadcast and peer-to-peer (a.k.a. unicast). For broadcast, data is transmitted simultaneously to all consumers. Just as a conference call, all participants get the same information from the speaker at the same time. For peer-to-peer, data is sent to a single receiver, defined by a specific address. For example, a letter goes to just one mail box. == Single-domain == In some domains, a multiple source and target schema (proprietary data formats) may exist. An exchange or interchange format is often developed for a single domain, and then necessary routines (mappings) are written to (indirectly) transform/translate each and every source schema to each and every target schema by using the interchange format as an intermediate step. That requires less work than writing and debugging the many routines that would be required to directly translate each source schema directly to each target schema. Examples of these transformative interchange formats include: Standard Interchange Format for geospatial data; Data Interchange Format for spreadsheet data; Open Document Format for spreadsheets, charts, presentations and word processing documents; GPS eXchange Format or Keyhole Markup Language for describing GPS data; GDSII for integrated circuit layout. == Representation == A data exchange (a.k.a. interchange) language defines a domain-independent way to represent data. These languages have evolved from being markup and display-oriented to support the encoding of metadata that describes the structural attributes of the information. Practice has shown that certain types of formal languages are better suited for this task than others, since their specification is driven by a formal process instead of particular software implementation. For example, XML is a markup language that was designed to enable the creation of dialects (the definition of domain-specific sublanguages). However, it does not contain domain-specific dictionaries or fact types. Beneficial to a reliable data exchange is the availability of standard dictionaries-taxonomies and tools libraries such as parsers, schema validators, and transformation tools. === XML === The popularity of XML for data exchange on the World Wide Web has several reasons. First of all, it is closely related to the preexisting standards Standard Generalized Markup Language (SGML) and Hypertext Markup Language (HTML), and as such a parser written to support these two languages can be easily extended to support XML as well. For example, XHTML has been defined as a format that is formal XML, but understood correctly by most (if not all) HTML parsers. === YAML === YAML was designed to be human-readable and authored via a text editor with notion similar to reStructuredText and wiki syntax. YAML 1.2 also includes a shorthand notion that is compatible with JSON, and as such any JSON document is also valid YAML; this however does not hold the other way. === REBOL === REBOL was designed to be human-readable and authored via a text editor. It uses a simple free-form syntax with minimal punctuation and a rich set of data types (such as URL, email, date and time, tuple, string, tag) that respect common standards. It is designed to not need any additional meta-language, being designed in a metacircular fashion which is why the parse dialect used for definitions and transformations of REBOL dialects is also itself a dialect of REBOL. REBOL was used as a source of inspiration for JSON. === Gellish === Gellish English is a formalized subset of natural English (language), which includes a simple grammar and a large, extensible dictionary (taxonomy) that defines the general and domain specific terminology, whereas the concepts are arranged in a hierarchy, which supports inheritance of knowledge and requirements. The dictionary also includes standardized fact types. The terms and relation types together can be used to create and interpret expressions of facts, knowledge, requirements and other information. Gellish can be used in combination with SQL, RDF/XML, OWL and various other meta-languages. The Gellish standard is a combination of ISO 10303-221 (AP221) and ISO 15926. === List === The following describes and compares popular data exchange languages. Columns Schemas – Whether supports representing domain specific data structure definition Flexible – Whether supports extension of the semantic expression capabilities without modifying the schema Semantic verification – Whether supports semantic verification of the correctness of expressions in the language Dictionary – Whether includes a dictionary and a taxonomy (hierarchy) of concepts with inheritance Information model – Whether supports an information model Synonyms and homonyms – Whether supports the use of synonyms and homonyms in expressions Dialecting – Whether is available in multiple natural languages or dialects Web standard – Whether is standardized by a recognized body Transformations – Whether includes a translation to other standards Lightweight – Whether a lightweight version is available Human readable – Whether expressions are understandable without training Compatibility – Which other tools can be used or are required

  Read more →